Wood Cleaning Brush

Description

General Description

First, the process of flap wheel sanding denibbs your product. This is to remove the small fibers that pop up when sanded in any other way or when any type of chemical or water is applied to the surface of the material. These fibers if not removed will raise up and set in a dried position causing a rough primer or stain and seal coat. This will require additional sanding time being needed between coats to achieve a smooth top coat. Utilizing a flap wheel head will remove these fibers resulting in much less sanding time between coats.

In some cases less finish materials will be required because there is less fiber to cover.

Technical Description

For the Aging-effect/Texturing we produce brushes with the following filaments:

Crimped Steel of different sections, between 0,20 – 0,50 mm
LIZ Iron Cord, available in two sections: 0,175 and 0,25 mm
Abrasive Nylon in the grits 46 – 60 – 80 – 120 – 180 – 320

For Dust removal and the Distribution of paint use filaments that have the peculiar property to not charge electrostatic while in use, like:
Horsehair
Tampico (plant fiber) that also has a very light abrasive function of finishing.

Sanayi Mah.

+90 212 677 1301

Working Hours

Wood Cleaning Brush

Wood Cleaning Brush

Description